54kN Lifting Wire Rope Tirfor Aluminum Wire Rope Hand Winch

• Wire Rope Puller Hoist, newly produced in our works, is a kind of hoist with high efficiency, safe and durable in service.

• They are particularly useful for longer pulls and higher lifts as the length of steel wire rope can be increased to suit the job.

• The Hoist can be used for any lifting, lowering or puling job within the rated capacity of the machine.

• It can also change its operating position by adding some accessories, such as pulley and rigging, so as to move the load more conveniently. It can also be increased by using a pulley block or multiple machines in parallel.

Simple structure and powerful function

Fast and easy installation, Simple to feed in or remove the wire rope, Continuous operation without snatching, Changeover from forward to reverse operation by transferring the operating handle from one lever to another, Works in any position horizontal, vertical or angled.

Load positioning accurate to mm

Whether lifting or lowering, the load is permanently controlled with the utmost precision; when operation st load is spread between the two jaw blocks.

Safe and reliable

Each Hoist is tested to 1.5 times of the rated capacity. The jaws and connecting axle have been quenched, and the modules have been electroplated. The performance of the products will not be affected after the four-fold strength test.

Increase the nominal capacity with multiple sheave blocks

The rated load of the machine can be increased with the snatch block and the traction direction of the machine can be changed by the fixed snatch block or fixed object.

Escalators,elevators

loading,unloading and rigging of prefabricated escalators;lifting and positioning the cabins and drawing mechanisms;

Safety device to prevent overloading

Each Hoist has a built in shear pin which is designed to break at approximately 25% above the working load limit, this prevents excessive over loading. The pins can be replaced without releasing the load. two spare pin s are located In the carry handle.

Pipelaying and jointing

positioning of pipes for welding and jointing;laying concrete pipes and pulling them together;

The length of the wire rope is not limited

Standard length of steel wire rope is 20 meters but custom length s available on request.